信息详情
铝材公司密封圈、高压油管等橡胶制品招标公告(原标题: 密封圈、高压油管等橡胶制品年协)
全部类型山东烟台2025年12月04日
公告详情
| 招标信息 | |||
|---|---|---|---|
| 招标单位 | 点击登录查看 | 项目名称 | 密封圈、高压油管等橡胶制品年协 |
| 质保期 | 报名截止日期 | ||
| 招标邮箱 | ****@nanshan.com.cn | ||
| 竞标保证金信息 | |||
|---|---|---|---|
| 项目保证金 | 5000.00元 | 帐户名称 | 山东新南铝材科技开发有限公司 |
| 帐号 | **** | 开户行 | 中国银行龙口南山支行 |
| 备注 | |||
| 备注：竞价保证金汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。 | |||
| 供应审计部招标联系人信息 | |||
|---|---|---|---|
| 标书联系人 | 点击登录查看 | 办公电话 | 点击登录查看 |
| 邮件 | 点击登录查看 | ||
| 标书汇款相关信息 | |||
|---|---|---|---|
| 账户名称 | 点击登录查看 | 账号 | 点击登录查看 |
| 开户行 | 点击登录查看 | 行号 | 点击登录查看 |
| 标书收费标准 | 地址、电话 | 点击登录查看 | |
| 备注：标书费汇款只接受公司转账，不支持个人名义转账或银行柜台现金转账。注明标书费的用途或投标项目名称。 | |||
| 物品名称 | 规格型号 | 数量 | 单位 | 描述 |
|---|---|---|---|---|
| 油管 | Ф25.5*2500 | 2.00 | 根 | {"型号":"Ф25.5*2500","材质":"丁晴橡胶加两层钢编网加强","接头材质":"碳钢","接头尺寸":"外径Ф38平口","接头形式":"平口","长度":"2500mm","压力":"20MPa","特殊要求":"外包钢丝网"} |
| SNIF氯气胶管 | 2*10*19 | 12.00 | 米 | {"型号":"2*10*19","材质":"三元乙丙橡胶","内径":"Φ10mm","外径":"Φ19mm","高度":"0","使用介质":"氯气","工作压力":"0.8Mpa"} |
| 高压软管 | 4HA12*19300 | 3.00 | 根 | {"型号":"4HA12*19300","图号":"****","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"24°锥密封，接头为A型","长度":"19300mm","压力":"350bar","所属设备名称":"双机架冷轧机","设备型号":"2500mm","设备生产厂家":"西马克","国产/进口":"国产","使用寿命":"730天","特殊要求":"软管和密封具有良好的耐轧制油腐蚀和阻燃性。到货验收：物质不满足技术要求退换货处理；退换货产生的费用由供货商承担。","参照标准":"SN 756-2007"} |
| 膨胀节 | DN100*130 | 10.00 | 个 | {"规格型号":"DN100*130","公称压力":"1.6Mpa","公称直径":"100","材质":"法兰材质:Q235B、内衬材质:CSM","适用温度":"-20~100","特殊要求":"带限制杆作为限幅器"} |
| O型密封圈 | 22*2 | 100.00 | 个 | {"规格型号":"22*2","内径":"Φ22mm","外径":"Φ26mm","丝径":"Φ2mm","材质":"丁腈橡胶","工作温度":"-20~80℃","使用寿命":"1095天"} |
| O型密封圈 | 48*3.5 | 100.00 | 个 | {"规格型号":"48*3.5","内径":"41mm","外径":"Φ48mm","丝径":"3.5mm","材质":"氟橡胶"} |
| O型密封圈 | 14*2 | 100.00 | 个 | {"规格型号":"14*2","内径":"0","外径":"Φ0","丝径":"2mm","材质":"氟橡胶FKM","使用寿命":"≥3个月","参照标准":"GB/T 3452.1-2005"} |
| O型密封圈 | Φ16*2.4 | 100.00 | 个 | {"规格型号":"Φ16*2.4","内径":"0","外径":"Φ16mm","丝径":"2.4mm","材质":"丁腈橡胶"} |
| O型密封圈 | Ф35*3.1/丁氰橡胶 | 100.00 | 个 | {"规格型号":"Ф35*3.1/丁氰橡胶","内径":"0","外径":"Φ0","丝径":"0","材质":"丁氰橡胶","工作温度":"耐高温200℃℃","使用寿命":"＞2个月"} |
| O型密封圈 | 26*2.4 | 100.00 | 个 | {"规格型号":"26*2.4","内径":"21.2mm","外径":"Φ26mm","丝径":"2.4mm","材质":"氟橡胶"} |
| O型密封圈 | Φ30*3.1 | 100.00 | 个 | {"规格型号":"Φ30*3.1","内径":"0","外径":"Φ30mm","丝径":"3.1mm","材质":"氟橡胶"} |
| O型密封圈 | 45*3.1 | 100.00 | 个 | {"规格型号":"45*3.1","内径":"Φ38.8mm","外径":"Φ45mm","丝径":"Φ3.1mm","材质":"丁腈橡胶","硬度要求":"80度","工作温度":"0-200℃","使用寿命":"365天","参照标准":"GB/T 3452.1-2005","备注":"备件外观包装良好，密封整体平整光滑，点击登录查看裂边毛刺凹凸现象，各项加工尺寸符合技术要求，否则进行退换货处理，因此产生的损失由供货商承担。"} |
| O型密封圈 | 52*3 | 100.00 | 个 | {"规格型号":"52*3","内径":"Φ52mm","外径":"Φ58mm","丝径":"Φ3mm","材质":"氟橡胶","工作温度":"-20~80℃","使用寿命":"180天"} |
| O型密封圈 | Ф40*3.1/丁氰橡胶 | 100.00 | 个 | {"规格型号":"Ф40*3.1/丁氰橡胶","内径":"0","外径":"Φ0","丝径":"0","材质":"丁氰橡胶","工作温度":"耐高温200℃℃","使用寿命":"＞2个月"} |
| O型密封圈 | Ф22*2.55 | 100.00 | 个 | {"规格型号":"Ф22*2.55","内径":"Φ16.9mm","外径":"Φ22mm","丝径":"Φ2.55mm","材质":"氟橡胶","使用寿命":"180天"} |
| O型密封圈 | 9*1.9mm | 100.00 | 个 | {"规格型号":"9*1.9mm","内径":"Φ5.2mm","外径":"Φ9mm","丝径":"Φ1.9mm","材质":"氟橡胶","硬度要求":"60度","工作温度":"≤180℃","使用寿命":"180天","参照标准":"GB/T 3452.1-2005","备注":"1、外径允许极限偏差：±0.2mm，丝径允许极限偏差：±0.1mm。2、备件到货附带出厂产品合格证。3、点击登录查看品牌要求，备件外观包装良好，密封整体平整光滑，点击登录查看裂边毛刺凹凸现象，各项加工尺寸符合技术要求，否则进行退换货处理，因此产生的损失由供货商承担。"} |
| 胶管 | 4HA20*1800 | 5.00 | 根 | {"型号":"4HA20*1800","材质":"4层钢丝橡胶软管","接头材质":"碳钢","接头尺寸":"M36*2","接头形式":"24°锥密封","使用寿命":"365天","特殊要求":"由于长期浸泡轧制油,要求胶管和接头密封有很好的耐轧制油腐蚀性和阻燃性"} |
| 液压油管 | 20*4*2500 | 1.00 | 根 | {"型号":"20*4*2500","材质":"四层钢丝缠绕橡胶软管","接头材质":"碳钢","接头尺寸":"M36*2","接头形式":"24°锥密封，两头直","长度":"2500mm","压力":"350bar","国产/进口":"国产","使用寿命":"365天"} |
| 高压油管 | DN6*500*18 | 2.00 | 根 | {"型号":"DN6*500*18","图号":"点击登录查看","材质":"丁腈橡胶+二层钢丝","接头材质":"碳钢","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"500","压力":"40Mpa","所属设备名称":"切边线","设备型号":"0.15~2mm×2650mm","设备生产厂家":"达涅利","国产/进口":"进口","使用寿命":"365天","特殊要求":"两头直头,两端锥口24°","参照标准":"GB/T 3683-2011","备注":"到货附带出厂合格证明及试压说明.包装完好,内部备件点击登录查看磕碰,软管胶皮点击登录查看破损,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."} |
| 金属软管 | DN20*2.5MPa | 16.00 | 根 | {"规格型号":"DN20*2.5MPa","公称直径":"20mm","公称压力":"2.5Mpa","长度":"800mm","连接件形式":"俩头内丝接口M30","材质":"304","特殊要求":"必须配有合格证","使用寿命":"≥365天","参照标准":"GB/T 14525-2010"} |
| 高温软管(一直一弯) | 900*1/4D | 12.00 | 根 | {"型号":"900*1/4D","材质":"接头材质:碳钢、内芯材质:PA12、增强层材质:涤纶丝、外涂层材质:聚氨酯","高度":"900mm","使用介质":"导热油","工作压力":"32Mpa"} |
| 高温软管(两直) | 900*1/4D | 12.00 | 根 | {"型号":"900*1/4D","材质":"接头材质:碳钢、内芯材质:PA12、增强层材质:涤纶丝、外涂层材质:聚氨酯","高度":"900mm","工作压力":"32Mpa"} |
| 高压软管 | F50A*950*SHA-250K-X | 5.00 | 根 | {"型号":"F50A*950*SHA-250K-X","材质":"外层耐腐蚀合成橡胶,内层耐油合成橡胶","接头材质":"镀锌碳钢","接头形式":"两端方法兰压扣连接","长度":"950mm","压力":"260bar","所属设备名称":"1+4轧机","设备型号":"2350mm","设备生产厂家":"IHI","国产/进口":"国产","使用寿命":"240天","特殊要求":"内附4层高抗拉钢丝缠绕"} |
| 高压软管 | 4SP-3/8-1100 | 5.00 | 根 | {"型号":"4SP-3/8-1100","材质":"4层高抗拉钢丝缠绕，耐油合成橡胶","接头材质":"碳钢","接头尺寸":"DN10","接头形式":"C型","长度":"1100mm","压力":"30MPa","使用寿命":"1095天"} |
| 4层钢丝缠绕胶管 | 4SP-R1/2*2300 | 6.00 | 根 | {"型号":"4SP-R1/2*2300","图号":"点击登录查看","材质":"外层耐腐蚀合成橡胶,内层耐油合成橡胶","接头材质":"镀锌碳钢","接头尺寸":"R1/2","接头形式":"两端均为C型扩口压扩活接头","长度":"2300mm,偏差+2%","压力":"400bar","所属设备名称":"1+4轧机","设备型号":"2350mm","设备生产厂家":"IHI","国产/进口":"国产","使用寿命":"540天","特殊要求":"软管内附4层高抗拉钢丝缠绕,外层橡胶包覆.","参照标准":"JB/T 8727-2017","备注":"到货备件附带合格证,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."} |
| 4层钢丝缠绕胶管 | 4SP-R1/2*2450 | 3.00 | 根 | {"型号":"4SP-R1/2*2450","材质":"外层耐腐蚀合成橡胶,内层耐油合成橡胶","接头材质":"镀锌碳钢","接头尺寸":"R1/2","接头形式":"两端均为C型扩口压扩活接头","长度":"2450mm,偏差+2%","压力":"400bar","国产/进口":"国产","使用寿命":"540天","特殊要求":"软管内附4层高抗拉钢丝缠绕"} |
| 高压油管 | M42*2/DN25/8400mm | 2.00 | 根 | {"型号":"M42*2/DN25/8400mm","图号":"点击登录查看","材质":"合成橡胶+两层高强度钢丝层","接头材质":"碳钢","接头尺寸":"M42*2","接头形式":"两端24°锥,锥口30,通径DN25,两头直通","长度":"8400mm","压力":"36MPa","所属设备名称":"2#拉矫","设备型号":"C2150.KA67","设备生产厂家":"西门子奥钢联","国产/进口":"国产","使用寿命":"365天","特殊要求":"外层不锈钢编织钢丝耐磨层,油管自带O型圈,O型圈材质:丁腈橡胶","参照标准":"GB/T 3683-2011","备注":"到货外包装点击登录查看破损,划伤,油管两端有防尘堵头,点击登录查看品牌要求,到货需附带检验报告及合格证,如到货质量与技术要求不符,换货至退货处理,产生费用由供货商承担"} |
| 骨架油封 | BAU3/SLX2/52*100*10/ | 2.00 | 个 | {"规格型号":"BAU3/SLX2/52*100*10/7","内径":"52mm","外径":"Φ100mm","高度":"10","骨架材质":"低碳钢","密封材质":"丁腈橡胶","结构形式":"双唇口外包胶","工作温度":"≤80","使用寿命":"12月"} |
| O型密封圈 | 14.8*2.4 | 296.00 | 个 | {"规格型号":"14.8*2.4","内径":"14.8mm","外径":"Φ19.6mm","丝径":"2.4mm","材质":"氢化丁腈橡胶","工作温度":"80℃","使用寿命":"1年","参照标准":"GB/T 3452.1-2005"} |
| 散热片密封 | NT250SB-10/NBR | 243.00 | 个 | {"规格型号":"NT250SB-10/NBR","长度":"1690mm","宽度":"9mm","高度":"4mm","材质":"丁腈橡胶","工作温度":"80℃","工作介质":"冷却水,轧制油","特殊要求":"散热片型号:NT250SB-10","使用寿命":"730天","参照标准":"GB/T 41487-2022","备注":"密封长度为安装位置最高处测量值，宽度为单侧测量值，如需其他准确数据，可与我方负责人联系进行确认。验收要求：密封截面应保持平滑不得出现残渣，到货不符合技术要求，退换货处理，所产生的费用由供货方承担"} |
| 散热片密封 | NT250M | 233.00 | 个 | {"规格型号":"NT250M","长度":"1984mm","宽度":"9mm","高度":"4mm","材质":"丁腈橡胶","工作温度":"80℃","工作介质":"轧制油,水","特殊要求":"该密封用于NT250M/B-10的板式换热器散热片,必须耐轧制油","使用寿命":"730天","参照标准":"GB/T 41487-2022","备注":"密封长度为安装位置最高处测量值，宽度为单侧测量值，如需其他准确数据，可与我方负责人联系进行确认。验收要求：密封截面赢保持平滑不得出现残渣，到货不符合技术要求，退换货处理，所产生的费用由供货方承担"} |
| 高压软管 | 2SP*13*1600 | 4.00 | 根 | {"型号":"2SP*13*1600","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M24*1.5","接头形式":"螺纹","长度":"1600mm","压力":"34.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：16mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SP*13*2300 | 4.00 | 根 | {"型号":"2SP*13*2300","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M24*1.5","接头形式":"螺纹","长度":"2300mm","压力":"27.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：16mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SP*40*1190 | 1.00 | 根 | {"型号":"2SP*40*1190","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M52*2","接头形式":"螺纹","长度":"1190mm","压力":"11Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：36mm","参照标准":"JB/T 8727-2017"} |
| 高压油管 | 2*10*500 | 4.00 | 根 | {"型号":"2*10*500","图号":"点击登录查看","材质":"丁晴橡胶+两层钢丝缠绕","接头材质":"Q235碳钢","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"500mm","压力":"33Mpa","所属设备名称":"2#切边","设备型号":"FP08C301","设备生产厂家":"德国达涅利","国产/进口":"国产","使用寿命":"365天","特殊要求":"锥口10mm、通径DN10、带O型密封圈、两头直","参照标准":"GB/T 3683-2011","备注":"到货附带出厂合格证明及试压说明.包装完好,内部备件点击登录查看磕碰,软管胶皮点击登录查看破损,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."} |
| 高压软管 | 4SP*19*2000 | 4.00 | 根 | {"型号":"4SP*19*2000 ","材质":"丁腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头尺寸":"M30*2","接头形式":"螺纹","长度":"2000mm","压力":"43Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：22mm","参照标准":"JB/T 8727-2017"} |
| 不锈钢金属软管 | DN51*3000mm | 6.00 | 根 | {"规格型号":"DN51*3000mm","公称直径":"51mm","公称压力":"1.6Mpa","长度":"3000mm","连接件形式":"两头平头内丝","材质":"接头材质:304不锈钢;内部材质:304不锈钢波纹管;外部材质:304不锈钢丝编织网","特殊要求":"接头规格:2\"","使用寿命":"365天","参照标准":"GB/T 14525-2010","备注":"到货验收:到货需附带合格证,若到货不符合技术要求供应商应点击登录查看偿进行退货或者换货,一切损失有供应商承担."} |
| 高压软管 | 2SN*25*5000 | 6.00 | 根 | {"型号":"2SN*25*5000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M36*2","接头形式":"螺纹","长度":"5000mm ","压力":"27.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：28mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SN*22*800 | 4.00 | 根 | {"型号":"2SN*22*800","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M36*2","接头形式":"螺纹","长度":"800mm","压力":"25Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：28mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SN*10*2000 | 2.00 | 根 | {"型号":"2SN*10*2000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M20*1.5","接头形式":"螺纹","长度":"2000mm","压力":"36MPa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头，一弯头，两端均为锥口，锥口直径：12mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SN*10*2000 | 2.00 | 根 | {"型号":"2SN*10*2000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M20*1.5","接头形式":"螺纹","长度":"2000mm","压力":"36MPa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：12mm","参照标准":"JB/T 8727-2017"} |
| 胶管总成 | 1S-12-500 | 20.00 | 根 | {"型号":"1S-12-500","图号":"点击登录查看","材质":"内外层为合成橡胶，一层钢丝","接头材质":"碳钢","接头尺寸":"M22*1.5","接头形式":"公制内螺纹","长度":"500mm","压力":"10bar","所属设备名称":"铝箔轧机","设备型号":"ф280/850*2000","设备生产厂家":"阿亨巴赫","国产/进口":"国产","使用寿命":"365天","特殊要求":"点击登录查看","参照标准":"JB/T 8727-2017","备注":"到货验收标准:1.包装完好,内部备件点击登录查看破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| 高压油管 | DN13*1500*24 | 5.00 | 根 | {"型号":"DN13*1500*24","图号":"点击登录查看","材质":"丁腈橡胶+二层钢丝","接头材质":"碳钢","接头尺寸":"M24*1.5","接头形式":"螺纹","长度":"1500","压力":"45Mpa","所属设备名称":"切边线","设备型号":"0.15~2mm×2650mm","设备生产厂家":"达涅利","国产/进口":"进口","使用寿命":"365天","特殊要求":"两头直头，两端锥口24°","参照标准":"GB/T 3683-2011","备注":"到货附带出厂合格证明及试压说明.包装完好,内部备件点击登录查看磕碰,软管胶皮点击登录查看破损,若备件不符合技术要求或出现质量问题,厂家应及时给予退换货,由此产生的费用由供货方承担."} |
| 高压软管 | 2SP*10*13000 | 2.00 | 根 | {"型号":"2SP*10*13000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"13000mm","压力":"38Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：12mm","参照标准":"JB/T 8727-2017"} |
| O型密封圈 | Ф162.1*3.55/氟橡胶 | 12.00 | 个 | {"规格型号":"Ф162.1*3.55/氟橡胶","内径":"Φ155mm","外径":"Φ162.1mm","丝径":"Φ3.55mm","材质":"氟橡胶","硬度要求":"70IRHD","工作温度":"≥200℃","使用寿命":"≥3个月天","参照标准":"GB/T 3452.1-2005","备注":"1、供货商提供产品合格证、到货清单。2、要求：产品表面要光洁、点击登录查看凹坑、点击登录查看飞边，耐油、耐高温、密封性好，弹性好。3、验收标准：来货如与技术要求不符或存在质量问题，供应商点击登录查看条件给予免费退、换货处理。"} |
| 液压软管 | 1H-26-16 | 10.00 | 根 | {"型号":"1H-26-16","材质":"带金属保护层的橡胶软管，接头45号钢","内径":"Φ16mm","外径":"Φ30.5mm","高度":"1000mm","颜色":"外观灰色","使用介质":"46号液压油","工作压力":"25Mpa","参照标准":"GB/T 9065.2-2025、GB/T 15329-2019","备注":"24度锥形口接头，接头螺纹为M26×1.5，配带密封圈。液压管为两个直头，耐压250bar。使用寿命不低于1年，如果到货不符或存在质量问题，厂家及时免费退换货，费用全部由厂家承担。"} |
| 液压油管 | DN12*10000两端直头 | 2.00 | 根 | {"型号":"DN12*10000两端直头","图号":"点击登录查看","材质":"胶管为钢丝编制+橡胶，密封为橡胶，接头为碳钢","接头材质":"24度锥口，接头材质为碳钢，接头密封为橡胶","接头尺寸":"DN12","接头形式":"24度锥口密封，螺纹拧紧连接","长度":"10000mm","压力":"大于200bar","所属设备名称":"2#连退","设备型号":"HH-HXX-01","设备生产厂家":"安德里茨","国产/进口":"进口","使用寿命":"730天","特殊要求":"管接头到货带有防尘塞，使用温度要求0-80摄氏度","参照标准":"GB/T 3683-2011","备注":"验收标准：符合技术要求各项规定，产品点击登录查看破损，配带密封防尘罩并附带合格证明不合格产品处理方式：对来货验收不符合要求的，进行更换或退货处理，退换货产生的一切费用由供货商承担。"} |
| 聚氨酯板 | 1300*225*155 | 3.00 | 件 | {"规格型号":"1300*225*155","厚度":"155mm","宽度":"225mm","材质":"聚氨酯","耐油性能":"B类 中等耐油 3#标准油 100℃*72h 体积变化率（+40~+90）%","硬度要求":"邵氏A 85±5","抗撕裂性能":"直角点击登录查看割口试样 ≥45KN/m","拉断强度":"150%以上","拉伸强度":"10MPa以上","使用寿命":"≥180天","特殊要求":"1.表面光滑点击登录查看不规则凹凸点；2.长宽高符合要求；3.侧面点击登录查看瑕疵，整洁美观；","参照标准":"GB/T 5574-2008、GB/T 1690-2010、GB/T 528-2009、GB/T 531.1-2008、GB/T 529-2008","备注":"规格：1300*225*155（自然水平放置时，测量尺寸必须大于图纸标识尺寸）\n材料整体执行GB/T 5574-2008标准；\n耐油性能测定按照GB/T 1690-2010标准执行；\n拉伸强度、拉端伸长率测定按照GB/T 528-2009执行；\n硬度测定按照GB/T 531.1-2008执行；\n抗撕裂性能参照GB/T 529-2008执行；\n制造之日起（产品质量合格证日期为准），贮藏时间不超过一年，产品性能均应符合本要求。\n我司点击登录查看法实现的检测，须由供货方提供检测报告或者提供我司可接受的证据后方可接收。"} |
| 橡胶软连接 | DN80PN16 | 1.00 | 件 | {"规格":"DN80PN16","类型":"可曲挠橡胶双法兰接头","公称直径":"80mm","连接形式":"法兰连接","材质":"橡胶材质:耐油丁碃橡胶;法兰材质:304不锈钢;","工作压力":"1.6(16bar)MPa","工作温度":"-20～+100℃","介质":"液压油","法兰尺寸":"200mm","使用寿命":"＞365天","参照标准":"GB/T 26121-2010","备注":"DN80PN16原件为品牌ELAFLEX,型号:ERV-G80.16型,非标件,如国产化或替换其它品牌请保证尺寸,(BL长度为两件法兰边长度,头部橡胶为弧形,方便碟型截止阀旋转点击登录查看干涉,请务必注意).验收标准:到货附带合格证;备件点击登录查看破损;点击登录查看变形;安装尺寸正确点击登录查看误,不合格处理标准:如果出现尺寸和质量问题;厂家应及时给予退换货处理;由此产生的一切费用,由供货方承担."} |
| 橡胶软连接 | DN100PN16 | 1.00 | 件 | {"规格":"DN100PN16","类型":"可曲挠橡胶双法兰接头","公称直径":"100mm","连接形式":"法兰连接","材质":"橡胶材质:耐油丁碃橡胶;法兰材质:304不锈钢;","工作压力":"1.6(16bar)MPa","工作温度":"-20～+100℃","介质":"液压油","法兰尺寸":"220mm","使用寿命":"＞365天","参照标准":"GB/T 26121-2010","备注":"DN100PN16原件为品牌ELAFLEX,型号:ERV-G100.16型,非标件,如国产化或替换其它品牌请保证尺寸,(BL长度为两件法兰边长度,头部橡胶为弧形,方便碟型截止阀旋转点击登录查看干涉,请务必注意).验收标准:到货附带合格证;备件点击登录查看破损;点击登录查看变形;安装尺寸正确点击登录查看误,不合格处理标准:如果出现尺寸和质量问题;厂家应及时给予退换货处理;由此产生的一切费用,由供货方承担."} |
| 橡胶联轴器 | Ф265 | 30.00 | 个 | {"规格型号":"Ф265","内径":"Φ164mm","外径":"Φ265mm","长度":"点击登录查看","材质":"天然橡胶","特殊要求":"耐油、中间层加织帆布，宽度为87毫米","参照标准":"GB/T 38768-2020","备注":"1、备件包装良好，点击登录查看破损，出厂附带出厂合格证，材质证明，各项加工尺寸参数符合技术要求，如验收不合格，需退换货处理，如因质量问题造成的损失由供货商承担。\n2、使用寿命12个月。\n3、国产件，不限定品牌厂家。"} |
| 密封圈 | EU 40 | 6.00 | 个 | {"规格型号":"EU 40","内径":"Φ40mm","外径":"Φ50mm","密封圈高度":"11.2mm","材质":"聚氨酯 PU","工作温度":"0～80℃","使用寿命":"365天"} |
| 不锈钢丝软管 | Φ10*2.8m | 8.00 | 根 | {"规格型号":"Φ10*2.8m","公称直径":"10mm","公称压力":"16Mpa","长度":"2800mm","连接件形式":"卡套式连接","材质":"表层不锈钢304编制,内层合成橡胶","使用寿命":"1095天"} |
| 密封包 | 50/36 | 3.00 | 套 | {"规格型号":"50/36","长度":"0mm","宽度":"0mm","高度":"0mm","材质":"格莱圈和斯特封是由PTFE材质与氟橡胶O形圈的组合密封圈；支承环由聚四氟乙烯；O形圈、防尘圈、轴用圈材质氟橡胶","工作温度":"60℃","工作介质":"煤油","特殊要求":"工作压力:100 bar；缸径：50mm；活塞杆直径：36mm","使用寿命":"365天","参照标准":"GB/T 10708.3-2000、GB/T 10708.1-2000、GB/T 3452.1-2005","备注":"密封包\\50/36\\0mm\\0mm\\0mm\\格莱圈和斯特封是由PTFE材质与氟橡胶O形圈的组合密封圈；支承环由聚四氟乙烯；O形圈、防尘圈、轴用圈材质氟橡胶\\60℃\\煤油\\工作压力:100 bar；缸径：50mm；活塞杆直径：36mm\\365天\\GB/T 10708.3-2000、GB/T 10708.1-2000、GB/T 3452.1-2005\\防溅板油缸密封包\\防尘圈28*36*4.5*5.8\\轴用圈28*36*5.7\\斯特封28*40*4\\挡圈55.4*50*2\\O型圈57*50*3.5\\O型圈21*16*2.5\\支承环50*45*9.7\\格莱圈50*38*4\\O型圈7*11*2\\\n到货验收标准:1.包装完好,内部备件点击登录查看破碎、损坏.2.型号,参数,等必须符合技术要求.3.升级型号的或替代型号的备件应带有升级或替代证明.4.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担."} |
| O型圈 | Ф397.1*3.55/氟橡胶 | 12.00 | 个 | {"规格型号":"Ф397.1*3.55/氟橡胶","内径":"Φ390mm","外径":"Φ397.1mm","丝径":"Φ3.55mm","材质":"氟橡胶","硬度要求":"70IRHD","工作温度":"≥200℃","使用寿命":"≥3个月天","参照标准":"GB/T 3452.1-2005","备注":"1、供货商提供产品合格证、到货清单。2、要求：产品表面要光洁、点击登录查看凹坑、点击登录查看飞边，耐油、耐高温、密封性好，弹性好。3、验收标准：来货如与技术要求不符或存在质量问题，供应商点击登录查看条件给予免费退、换货处理。"} |
| 轧辊轴承座水封 | 1203*1300*35 | 2.00 | 套 | {"规格型号":"1203*1300*35","内径":"Φ1203mm","外径":"Φ1300mm","厚度":"Φ35mm","材质":"1、密封材质：丁腈橡胶;2、垫圈材质：Q235 ;3、固定端盖材质：Q195/Q215A","硬度要求":"Shore A 60以上","工作温度":"80℃","特殊要求":"配套使用","使用寿命":"365天","参照标准":"GB/T 13871.1-2022","备注":"验收标准：需完全符合上述技术要求，并提供出厂检测报告或合格证；如与技术要求不符，需退换货处理，期间产生的费用由供货商承担。"} |
| 密封圈 | EU 25 | 4.00 | 个 | {"规格型号":"EU 25","内径":"Φ25mm","外径":"Φ35mm","密封圈高度":"11.2mm","材质":"聚氨酯 PU","工作温度":"0～80℃","使用寿命":"365天"} |
| 高压软管 | 2*10*2200 | 1.00 | 根 | {"型号":"2*10*2200","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"2200mm","压力":"33 Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两直头，两端均为锥口，锥口直径：10mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 4SH32/SFS-11/4DKOS38 | 1.00 | 根 | {"型号":"4SH32/SFS-11/4DKOS38/2150","图号":"点击登录查看","材质":"丁腈橡胶+高抗拉钢丝编制","接头材质":"碳钢","接头尺寸":"一头M52内螺纹，一头φ56法兰","接头形式":"一头24°锥，一头平口。","长度":"2100mm","压力":"350bar","所属设备名称":"推进式加热炉","设备型号":"ST0g990/283/1833Al","设备生产厂家":"艾伯纳工业炉厂","国产/进口":"国产","使用寿命":"365天","特殊要求":"点击登录查看","参照标准":"GB/T 10544-2013","备注":"点击登录查看"} |
| 软管 | 51*1*2020 | 1.00 | 根 | {"型号":"51*1*2020","图号":"51*1*2020","材质":"耐油橡胶","接头材质":"碳钢","接头尺寸":"M64*2mm","接头形式":"两头安装内螺纹","长度":"2020mm","压力":"0.8-1.2MPa","所属设备名称":"螺杆式空压机","设备型号":"ML250","设备生产厂家":"英格索兰（中国）工业设备制造有限公司","国产/进口":"国产","使用寿命":"730天","特殊要求":"必须与英格索兰空压机ML250油管型号****尺寸一致","参照标准":"GB/T 3683-2011","备注":"到货产品必须符合技术要求，达不到技术要求的厂家必须点击登录查看条件退换货物."} |
| 高压油管 | 13*2*1300 | 1.00 | 根 | {"型号":"13*2*1300","图号":"13*2*1300","材质":"丁晴橡胶,二层钢丝","接头材质":"碳钢","接头尺寸":"英制1/2\"管螺纹","接头形式":"英制内螺纹,球形头,一边扣直接头,另一边扣90°弯接头","长度":"1300±10mm","压力":"35Mpa","所属设备名称":"铝棒炉液剪机","设备型号":"880T","设备生产厂家":"佛山扬戈","国产/进口":"国产","使用寿命":"＞365天","特殊要求":"高压油管由钢丝缠绕骨架层和内外耐油,耐腐蚀,耐风化特种合成橡胶组成内径及长度要求:12.7mm,工作温度要求:-40~100℃","参照标准":"GB/T 3683-2011","备注":"货需附带检验报告,如到货质量与技术要求不符,换货至退货处理"} |
| 高压油管 | 13*2*1200 | 1.00 | 根 | {"型号":"13*2*1200","材质":"二层钢丝缠绕橡胶软管","接头材质":"碳钢","接头尺寸":"美制3/4″螺纹,每英寸16牙","接头形式":"一边扣直接头,另一边扣90°弯接头","长度":"1200mm","压力":"275bar","使用寿命":"180天","特殊要求":"美制JIC内螺纹 74°内锥面,一边扣直接头,另一边扣90°弯接头美制3/4″螺纹,每英寸16牙,3、油管外套防烫钢丝"} |
| 高压软管 | 4SP*19*1600 | 1.00 | 根 | {"型号":"4SP*19*1600","材质":"丁腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头尺寸":"M30*2","接头形式":"螺纹","长度":"1600mm","压力":"43Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头一弯头,两端均为锥口，锥口直径：20mm","参照标准":"JB/T 8727-2017"} |
| 高压油管 | M28*1.5/2-16-34/1500 | 1.00 | 根 | {"型号":"M28*1.5/2-16-34/1500","材质":"橡胶、钢丝","接头材质":"45#钢","接头尺寸":"28","接头形式":"平头","长度":"1500","压力":"32mpa","所属设备名称":"磷铁环压脱机","设备型号":"Φ400/Φ140","设备生产厂家":"沈阳沈京供水设备厂","国产/进口":"国产","使用寿命":"2年"} |
| 高压软管 | 2SP*10*1100 | 1.00 | 根 | {"型号":"2SP*10*1100","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"1100mm","压力":"27.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两端均为平口，两直头 ","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 13*2*1900 | 1.00 | 根 | {"型号":"13*2*1900","图号":"点击登录查看","材质":"内胶层:耐油合成橡胶,中间2层高强钢丝钢编,外胶层:耐腐蚀合成橡胶","接头材质":"碳钢","接头尺寸":"M22*1.5","接头形式":"一端直头螺母M22*1.5圆形锥口,另一端90°弯头螺母M22*1.5圆形锥口","长度":"1900±100mm","压力":"13Mpa","所属设备名称":"保温炉","设备型号":"100T","设备生产厂家":"美国安德里茨","国产/进口":"进口","使用寿命":"1095天","特殊要求":"点击登录查看","参照标准":"JB/T 6145-2007","备注":"验收:到货不合格供应商必须点击登录查看条件退货或换货处理,所产生的费用由供货方承担."} |
| 高压软管 | 4SP*32*3200 | 1.00 | 根 | {"型号":"4SP*32*3200","材质":"丁腈橡胶+四层钢丝缠绕","接头材质":"Q235","接头尺寸":"M45*2","接头形式":"螺纹","长度":"3200mm","压力":"40Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两弯头,，弯头朝一个方向，两端均为锥口，锥口直径：35mm","参照标准":"JB/T 8727-2017"} |
| 高压油管 | 4HA12*6500/M24*1.5/3 | 1.00 | 根 | {"型号":"4HA12*6500/M24*1.5/350bar","图号":"点击登录查看","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"DN12","接头形式":"M2*1.5,24°锥","长度":"6.5m","压力":"350bar","所属设备名称":"1+5热粗轧机","设备型号":"HC-HB-RZJ-01","设备生产厂家":"德国西马克","国产/进口":"进口","使用寿命":"365天","特殊要求":"点击登录查看","参照标准":"GB/T 3683-2011","备注":"到货物资与技术要求不符时,换货处理,"} |
| 高压油管总成 | DN20 AS30/AS30-1100 | 1.00 | 根 | {"型号":"DN20 AS30/AS30-1100","图号":"S 900147","材质":"合成橡胶+高强钢丝编织","接头材质":"碳钢","接头尺寸":"M30*2","接头形式":"24°锥管接头带O型密封圈,一头直通,一头90°弯.","长度":"1100mm","压力":"215bar","所属设备名称":"挤压机","设备型号":"11MN\\70MN","设备生产厂家":"德国西马克","国产/进口":"进口","使用寿命":"365天","特殊要求":"点击登录查看","参照标准":"GB/T 3683-2011"} |
| 高压软管 | 2SP*13*2500 | 1.00 | 米 | {"型号":"2SP*13*2500","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M22*1.5","接头形式":"螺纹","长度":"2500mm","压力":"34.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头一弯头,两端均为锥口，锥口直径：14mm","参照标准":"JB/T 8727-2017"} |
| 高压软管 | 2SP*13*2300 | 1.00 | 根 | {"型号":"2SP*13*2300","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M22*1.5","接头形式":"螺纹","长度":"2300mm","压力":"34.5Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头一弯头,两端均为锥口，锥口直径：15mm","参照标准":"JB/T 8727-2017"} |
| 高压油管 | 4SH*DN38*1200 | 1.00 | 根 | {"型号":"4SH*DN38*1200","图号":"点击登录查看","材质":"橡胶材质:丁腈耐油橡胶.增强层:4层高抗拉钢丝编织","接头材质":"45号钢","接头尺寸":"F型法兰连接,外径Φ63.5高度13","接头形式":"F型接头,一直头一135°弯头","长度":"1200mm","压力":"35Mpa","所属设备名称":"铝型材挤压机","设备型号":"明晟900吨挤压机","设备生产厂家":"明晨机电","国产/进口":"国产","使用寿命":"365天","特殊要求":"工作介质:液压油,4层钢丝编织胶管,抗压36Mpa,按图纸加工,附图纸","参照标准":"GB/T 3683-2011","备注":"收标准:符合技术要求各项规定,产品点击登录查看破损,配带密封防尘罩并附带合格证明.对来货验收不符合要求的,进行更换或退货处理,退换货产生的一切费用由供货方承担."} |
| 高压油管 | 4SH*DN38*1800 | 1.00 | 根 | {"型号":"4SH*DN38*1800","图号":"点击登录查看","材质":"橡胶材质:丁腈耐油橡胶.增强层:4层高抗拉钢丝编织","接头材质":"45号钢","接头尺寸":"F型法兰连接,外径Φ63.5高度13","接头形式":"F型接头,一直头一135°弯头","长度":"1800mm","压力":"35Mpa","所属设备名称":"挤压机","设备型号":"明晟9MN挤压机","设备生产厂家":"明晨机电","国产/进口":"国产","使用寿命":"365天","特殊要求":"工作介质:液压油,4层钢丝编织胶管,抗压35Mpa,按图纸加工,附图纸","参照标准":"GB/T 3683-2011","备注":"收标准:符合技术要求各项规定,产品点击登录查看破损,配带密封防尘罩并附带合格证明.对来货验收不符合要求的,进行更换或退货处理,退换货产生的一切费用由供货方承担."} |
| 高压油管 | 1-8-1000 | 1.00 | 根 | {"型号":"1-8-1000","材质":"合成橡胶","接头材质":"碳钢","接头尺寸":"M18","接头形式":"平面","长度":"1000mm","压力":"60MPa","使用寿命":"120天"} |
| 高压油管 | 4SH*DN38*1600 | 1.00 | 根 | {"型号":"4SH*DN38*1600","图号":"点击登录查看","材质":"橡胶材质:丁腈耐油橡胶.增强层:4层高抗拉钢丝编织","接头材质":"45号钢","接头尺寸":"F型法兰连接，外径Φ60.5高度12.5","接头形式":"F型接头,一直头一90°弯头","长度":"1600mm","压力":"35Mpa","所属设备名称":"铝型材挤压机","设备型号":"明晟1400吨挤压机","设备生产厂家":"明晟机电","国产/进口":"国产","使用寿命":"365天天","特殊要求":"工作介质:液压油,4层钢丝编织胶管,抗压35Mpa,按图纸加工,附图纸","参照标准":"GB/T 3683-2011","备注":"验收标准：符合技术要求各项规定，产品点击登录查看破损，配带密封防尘罩并附带合格证明不合格产品处理方式：对来货验收不符合要求的，进行更换或退货处理，退换货产生的一切费用由供货商承担"} |
| 高压软管 | 2SP*10*1050 | 1.00 | 根 | {"型号":"2SP*10*1050","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M20*1.5","接头形式":"螺纹","长度":"1050mm","压力":"36Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"一直头一弯头,两端均为锥口，锥口直径：12mm","参照标准":"JB/T 8727-2017"} |
| 透明钢丝管 | Ф80 | 1.00 | 米 | {"规格":"Ф80","工作温度":"-10~90℃","工作压力":"0.4Mpa","壁厚":"3","内径":"80"} |
| PU管 | Φ4*2.5 | 1.00 | 米 | {"型号":"Φ4*2.5","材质":"聚氨酯PU","内径":"Φ2.5mm","外径":"Φ4mm","高度":"4mm","颜色":"透明","使用介质":"压缩空气/水/流体","工作压力":"1.0Mpa","参照标准":"GB/T 9574-2017","备注":"1.使用寿命:12个月,环境使用温度:-20℃~50℃\n2.若不符合技术要求或出现质量问题,则退换货,产生的费用由供货方承担。"} |
| 高压软管 | 4SP-16*1400 | 1.00 | 根 | {"型号":"4SP-16*1400","材质":"四层钢丝编制的液压橡胶管","接头材质":"碳钢","接头尺寸":"M27*1.5","接头形式":"平头密封","使用寿命":"1095天"} |
| 压缩空气PU管 | Φ8*Φ5 | 1.00 | 米 | {"规格":"Φ8*Φ5","工作温度":"≤70","工作压力":"1","壁厚":"1.5mm","内径":"Φ5mm","外径":"Φ8mm","参照标准":"GB/T 9574-2017"} |
| (PVC+304不锈钢丝)透明钢丝管 | DN50 | 1.00 | 米 | {"规格":"DN50","壁厚":"3mm","内径":"50mm","参照标准":"GB/T 3683-2011"} |
| 高压软管 | 2SP*10*2000 | 1.00 | 根 | {"型号":"2SP*10*2000","材质":"丁腈橡胶+二层钢丝缠绕","接头材质":"Q235","接头尺寸":"M18*1.5","接头形式":"螺纹","长度":"2000mm","压力":"33Mpa","国产/进口":"国产","使用寿命":"365天","特殊要求":"两端均为平口，两直头 ","参照标准":"JB/T 8727-2017"} |
| 高压乙炔管 | LZ-φ8 | 1.00 | 盘 | {"型号":"LZ-φ8","材质":"丁苯橡胶内夹尼龙线层","内径":"Φ8mm","外径":"Φ12mm","高度":"25000mm","颜色":"红色","使用介质":"乙炔","工作压力":"3Mpa","参照标准":"GB/T 2550-2016","备注":"使用寿命≥3个月；到货附带合格证；如到货不符合技术要求，由供应商点击登录查看条件进行更换、退货。"} |
| 高压油管 | M22*1.5*1500/36MPa | 1.00 | 根 | {"型号":"M22*1.5*1500/36MPa","图号":"点击登录查看","材质":"由耐油（水）合成橡胶的内胶层、钢丝编织增强层.耐天候合成橡胶外胶层组成","接头材质":"碳钢","接头尺寸":"M22*1.5","接头形式":"一头直头一头90弯头","长度":"1500mm","压力":"36MPa","所属设备名称":"编解组","设备型号":"LYZD-9/7*2","设备生产厂家":"洛阳震动机械有限公司","国产/进口":"国产","使用寿命":"≥240天","特殊要求":"接口方式：平口","参照标准":"JB/T 8727-2017","备注":"到货油管两端有防尘堵头，如到货质量与技术要求不符，退换货处理，产生费用由供货商承担。"} |
| 高压氧气管 | LZ-φ8 | 1.00 | 盘 | {"型号":"LZ-φ8","材质":"丁苯橡胶内夹尼龙线层","内径":"Φ8mm","外径":"Φ12mm","高度":"30000mm","颜色":"蓝色","使用介质":"氧气","工作压力":"3Mpa","参照标准":"GB/T 2550-2016","备注":"使用寿命大于等于3个月，到货需附带材质证明和合格证，如到货不符合技术要求，由供应商点击登录查看条件进行更换、退货。"} |
| 高压油管 | 4HA12*12600/M24*1.5/ | 1.00 | 根 | {"型号":"4HA12*12600/M24*1.5/350bar","图号":"点击登录查看","材质":"四层钢丝编制液压橡胶管","接头材质":"碳钢","接头尺寸":"DN12","接头形式":"M24*1.5,24°锥","长度":"12.6m","压力":"350bar","所属设备名称":"1+5热粗轧机","设备型号":"HC-HB-RZJ-01","设备生产厂家":"德国西马克","国产/进口":"进口","使用寿命":"365天","特殊要求":"点击登录查看","参照标准":"GB/T 3683-2011","备注":"到货物资与技术要求不符时,换货处理."} |
| 压缩空气PU管 | Φ12*Φ8 | 1.00 | 米 | {"规格":"Φ12*Φ8","工作温度":"≤70","工作压力":"1","壁厚":"2mm","内径":"Φ8mm","外径":"Φ12mm","参照标准":"GB/T 9574-2017"} |
| PU管 | TU0604C-100 | 1.00 | 盘 | {"型号":"TU0604C-100","材质":"聚酯型PU管","接头尺寸":"外径6mm,内径4mm","长度":"20米/盘","压力":"1MPa","使用寿命":"80天"} |
| PU管 | Φ10 | 1.00 | 米 | {"型号":"Φ10","规格尺寸":"外径：10mm，内径6.5mm，","颜色":"透明/红色/蓝色","配套参数":"工作压力：0．5～1.5 Mpa","使用温度":"—25℃~70℃","产品材质":"聚氨酯"} |
| 高压油管 | DN16*1700*30 | 1.00 | 根 | {"型号":"DN16*1700*30","材质":"丁腈橡胶、二层钢丝","接头材质":"碳钢","接头尺寸":"M30*2、锥头24°","接头形式":"一直头、一90°弯头","长度":"1700","压力":"50","使用寿命":"180天"} |
| 钢丝管 | 2.7*3cm | 1.00 | 米 | {"规格":"2.7*3cm","连接形式":"管箍","工作温度":"90℃","工作压力":"1Mpa","壁厚":"3mm","内径":"27mm","外径":"30mm","参照标准":"GB/T 9574-2017"} |
| UN型密封圈 | UN 56*66*6 | 1.00 | 个 | {"规格型号":"UN 56*66*6","内径":"Φ56mm","外径":"Φ66mm","密封圈高度":"6","唇口高度":"2.5","唇形":"UN型","材质":"聚氨酯","工作温度":"-40-100℃","使用寿命":"180天","参照标准":"GB/T 15325-1994"} |
| O形圈密封组盒 | 2.9*1.78-43.82*5.34m | 1.00 | 组 | {"规格型号":"2.9*1.78-43.82*5.34mm","材质":"丁腈橡胶"} |
| 油封 | UPH105*125*15 | 1.00 | 套 | {"规格型号":"UPH105*125*15","内径":"Φ105mm","外径":"Φ125mm","密封圈高度":"15mm","材质":"聚醚聚氨酯,支撑环材质:聚四氟乙烯","工作温度":"-25~+100℃","使用寿命":"180天","备注":"原系统内物料编码转换到新系统内"} |
| 密封圈 | USH95*115*15 | 1.00 | 个 | {"规格型号":"USH95*115*15","内径":"Φ95mm","外径":"Φ115mm","密封圈高度":"15mm","唇口高度":"3.5mm","唇形":"U型","材质":"聚酯聚氨酯","工作温度":"-30~110℃","使用寿命":"365天","参照标准":"GB/T 9877-2008","备注":"工作压力:≤35MPa;工作介质:液压油;验收标准:符合技术要求各项规定,包装良好点击登录查看破损,并附带合格证明.对来货验收不符合要求的,进行更换或退货处理,退换货产生的一切费用由供货方承担."} |
| 矩形密封圈 | 12*16*2/35MPa | 1.00 | 个 | {"规格型号":"12*16*2/35MPa","内径":"Φ12mm","外径":"Φ16mm","厚度":"Φ2mm","材质":"氟橡胶","硬度要求":"邵氏80~90","工作温度":"-20~+200℃","特殊要求":"耐油、耐高温、耐高压","使用寿命":"≥90天","参照标准":"GB/T 3452.2-2007","备注":"表面应光滑点击登录查看裂痕，硬度必须达到邵氏80~90度，达不到以上标准供货方应点击登录查看条件退换货。"} |
| 矩形密封圈 | 11.5*17*2.3/35MPa | 1.00 | 个 | {"规格型号":"11.5*17*2.3/35MPa","内径":"Φ11.5mm","外径":"Φ17mm","厚度":"Φ2.3mm","材质":"氟橡胶","工作温度":"-25~+200℃"} |
| 矩形密封圈 | 22.5*16*2.5/35MPa | 1.00 | 个 | {"规格型号":"22.5*16*2.5/35MPa","内径":"Φ22.5mm","外径":"Φ16mm","厚度":"Φ2.5mm","材质":"氟橡胶","工作温度":"-25~+200℃"} |
| 矩形密封圈 | 21.5*26.5*2.35/35MPa | 1.00 | 个 | {"规格型号":"21.5*26.5*2.35/35MPa","内径":"Φ21.5mm","外径":"Φ26.5mm","厚度":"Φ2.35mm","材质":"氟橡胶","硬度要求":"邵氏硬度90±5","工作温度":"-25~+200℃","特殊要求":"耐磨损、抗老化、耐油、耐高压","使用寿命":"180天","参照标准":"GB/T 10444-2016"} |
| 矩形密封圈 | 23.5*16*2.5 | 1.00 | 个 | {"规格型号":"23.5*16*2.5","内径":"Φ16mm","外径":"Φ23.5mm","丝径":"Φ2.5mm","材质":"氟橡胶","硬度要求":"邵氏硬度90±5","工作温度":"-20~+200℃","使用寿命":"180天","参照标准":"GB/T 3452.1-2005"} |
| 矩形密封圈 | 14*10*2 | 1.00 | 个 | {"规格型号":"14*10*2","图号":"点击登录查看","材质":"氟橡胶","使用寿命":"365天","所属设备名称":"通用密封","设备型号":"通用密封","设备生产厂家":"通用密封","国产/进口":"点击登录查看限制","参照标准":"GB/T 30308-2013"} |
| 矩形密封垫 | 12.5*8.5*2 | 1.00 | 个 | {"规格型号":"12.5*8.5*2","图号":"点击登录查看","材质":"氟橡胶","使用寿命":"365天","所属设备名称":"通用密封","设备型号":"通用密封","设备生产厂家":"通用密封","国产/进口":"国产","参照标准":"GB/T 30308-2013"} |
| 矩形密封圈 | 9*12*1.9/35MPa | 1.00 | 个 | {"规格型号":"9*12*1.9/35MPa","图号":"点击登录查看","材质":"氟橡胶","使用寿命":"365天","所属设备名称":"通用密封","设备型号":"通用密封","设备生产厂家":"通用密封","国产/进口":"国产","参照标准":"GB/T 30308-2013"} |
| 活塞杆用V型组合密封 | 820*870*80mm | 1.00 | 套 | {"规格型号":"820*870*80mm","内径":"Φ820mm","外径":"Φ870mm","宽度":"80mm","轴径":"Φ820mm","材质":"尼龙+丁晴橡胶夹织物","工作压力":"35MPa","工作温度":"-40~120℃","使用寿命":"365天","特殊要求":"尼龙压环数量=1,尼龙支撑环数量=1,橡胶加布增强V型圈数量=4","退换货要求":"对来货验收不符合要求的,进行更换或退货处理.退换货产生的一切费用由供货方承担.","参照标准":"GB/T 10708.1-2000","备注":"工作介质:液压油"} |
| 活塞杆用V型组合密封 | 120*140*35mm | 1.00 | 套 | {"规格型号":"120*140*35mm","内径":"Φ120mm","外径":"Φ140mm","宽度":"35mm","轴径":"Φ120mm","材质":"橡胶夹织物+丁晴橡胶","工作压力":"35MPa","工作温度":"-40~120℃","使用寿命":"365天","特殊要求":"橡胶加布压环数量=1,橡胶加布支撑环数量=1,橡胶加布增强V型圈数量=3,丁晴橡胶V型圈数量=1","退换货要求":"对来货验收不符合要求的,进行更换或退货处理.退换货产生的一切费用由供货方承担.","参照标准":"GB/T 10708.1-2000","备注":"工作介质:液压油"} |
| FB型标准油封 | 22*42*11 | 1.00 | 套 | {"规格型号":"22*42*11","内径":"Φ22mm","外径":"Φ42mm","高度":"11mm","骨架材质":"碳钢","密封材质":"氟橡胶","结构形式":"双唇","工作温度":"-10~100℃","使用寿命":"365天","参照标准":"GB/T 9877-2008"} |
| 密封圈 | UNS55*75*12 | 1.00 | 个 | {"规格型号":"UNS55*75*12","内径":"Φ55mm","外径":"Φ75mm","密封圈高度":"12mm","唇口高度":"3mm","唇形":"U型","材质":"聚酯聚氨酯","工作温度":"-30~110℃","使用寿命":"365天","参照标准":"GB/T 9877-2008","备注":"工作压力:≤35MPa;工作介质:液压油;验收标准:符合技术要求各项规定,包装良好点击登录查看破损,并附带合格证明.对来货验收不符合要求的,进行更换或退货处理,退换货产生的一切费用由供货方承担."} |
| 油封(迫紧) | IDI105*125*15 | 1.00 | 个 | {"规格型号":"IDI105*125*15","内径":"Φ105mm","外径":"Φ125mm","密封圈高度":"15mm","材质":"聚氨酯","使用寿命":"＞6个月"} |
| 密封 | 90*102*15 | 1.00 | 个 | {"规格型号":"90*102*15","内径":"Φ0","密封圈高度":"0","材质":"聚醚聚氨酯","使用寿命":"＞6个月"} |
| U型密封 | 22*30*6 | 1.00 | 个 | {"规格型号":"22*30*6","内径":"Φ22mm","外径":"Φ30mm","密封圈高度":"6mm","唇口高度":"2mm","唇形":"U形","材质":"聚氨酯","工作温度":"100℃","使用寿命":"365天","参照标准":"GB/T 9877-2008"} |
| 轴用密封圈 | d200 | 1.00 | 个 | {"规格型号":"d200","内径":"Φ200mm","外径":"Φ216mm","密封圈高度":"18mm","唇形":"YX","材质":"聚氨酯","使用寿命":"180天"} |
| 密封 | UHS32*42*6 | 1.00 | 个 | {"规格型号":"UHS32*42*6","内径":"Φ32mm","外径":"Φ42mm","密封圈高度":"6mm","材质":"聚氨酯","使用寿命":"6个月"} |
| UN密封圈 | UN140*160*15 | 1.00 | 个 | {"规格型号":"UN140*160*15","内径":"Φ140mm","外径":"Φ160mm","厚度":"Φ15mm","材质":"聚氨酯","硬度要求":"邵氏A90","工作温度":"0~40℃","特殊要求":"点击登录查看","使用寿命":"180天","参照标准":"GB/T 36520.1-2018","备注":"用途:液压缸密封用,设备制造厂家:FATA(意大利),备件为国产件,验收:如所送备件与技术要求不符，由供货商点击登录查看条件退/换货."} |
| 活塞杆用V型组合密封 | 90*110*40mm | 1.00 | 套 | {"规格型号":"90*110*40mm","内径":"Φ90mm","外径":"Φ110mm","宽度":"40mm","轴径":"Φ90mm","材质":"橡胶夹织物+丁晴橡胶","工作压力":"35MPa","工作温度":"-40~120℃","使用寿命":"365天","特殊要求":"橡胶加布压环数量=1,橡胶加布支撑环数量=1,橡胶加布增强V型圈数量=3,丁晴橡胶V型圈数量=2","退换货要求":"对来货验收不符合要求的,进行更换或退货处理.退换货产生的一切费用由供货方承担.","参照标准":"GB/T 10708.1-2000","备注":"工作介质:液压油"} |
| 密封圈 | USH40*50*7 | 1.00 | 个 | {"规格型号":"USH40*50*7","内径":"Φ40mm","外径":"Φ50mm","密封圈高度":"7mm","唇口高度":"2mm","唇形":"USH","材质":"PU聚氨酯","工作温度":"-35℃~ +100℃℃","使用寿命":"365天","参照标准":"GB/T 9877-2008"} |
| 油封 | 45*55*6 | 1.00 | 个 | {"规格型号":"45*55*6","内径":"Φ0","密封圈高度":"0","材质":"丁晴橡胶","使用寿命":"＞6个月"} |
| O型密封圈 | 220*5.7 | 1.00 | 个 | {"规格型号":"220*5.7","外径":"Φ220mm","丝径":"Φ5.7mm","材质":"丁腈橡胶","使用寿命":"365天","参照标准":"GB/T 5720-2008"} |
| 密封圈 | 20*28*5 | 1.00 | 个 | {"规格型号":"20*28*5","内径":"Φ28mm","外径":"Φ20mm","密封圈高度":"5mm","材质":"聚氨酯"} |
| 发泡密封条 | 12*22 | 1.00 | 米 | {"规格型号":"12*22","直径":"22mm","上宽度":"22mm","下宽度":"22mm","高度":"12mm","材质":"三元乙丙","工作温度":"40℃","工作介质":"密封界质：煤油、电火花机油","使用寿命":"大于150天天","特殊要求":"具有耐油、耐腐蚀、抗挤压特性。压力（0.4—0.5MPA）","参照标准":"HG/T 4903-2016","备注":"验收标准：必须符合以上技术要求，配件不符合技术要求，退换货，产生的费用由供货方承担"} |
| 高压绝缘油管 | M40*2*2500 | 1.00 | 根 | {"型号":"M40*2*2500","接头尺寸":"M40*2","长度":"2500mm"} |
| 密封圈 | 28*38*8 | 1.00 | 个 | {"规格型号":"28*38*8","内径":"Φ0","密封圈高度":"0","唇形":"Y","材质":"PU","使用寿命":"＞6个月","参照标准":"GB/T 13871.1-2016"} |
| O形圈密封组盒 | 2.8*1.9-47.7*3.5 | 1.00 | 盒 | {"规格型号":"2.8*1.9-47.7*3.5","内径":"Φ47.7mm","外径":"Φ54.7mm","丝径":"Φ3.5mm","材质":"丁腈橡胶","硬度要求":"75±5","工作温度":"100℃","使用寿命":"365天","参照标准":"GB/T 3452.1-2005","备注":"到货验收：包装完好，外观完好点击登录查看损，带有合格证。如所送到物品不符合技术要求或质量不合格，供货商必须点击登录查看条件退换货，由此产生的费用由供货商负责。"} |
| 防尘密封圈 | EU16*26*10.7 | 1.00 | 个 | {"规格型号":"EU16*26*10.7","内径":"Φ16mm","外径":"Φ26mm","厚度":"Φ10.7mm","材质":"聚氨酯","硬度要求":"邵氏A90±2","工作温度":"-20至120℃","特殊要求":"表面光滑点击登录查看毛边,工作压力12bar","使用寿命":"365天","参照标准":"GB/T 10708.3-2000"} |
| 硅胶圈 | G1 | 1.00 | 个 | {"规格型号":"G1","内径":"Φ28mm","外径":"Φ35.6mm","丝径":"Φ3.8mm","材质":"硅橡胶","硬度要求":"硬度\\拉伸强度\\拉断伸长率应符合HG/T 2765.5-2005要求 ","使用寿命":"1095天","参照标准":"规格公差:GB/T 3452.1-2005\\物理性能:HG/T 2765.5-2005"} |
| 投标厂商资质 | |||
| 注册资金 | 专业资质 | ||
| 公司业绩 | |||
| 相关认证 | |||
| 其他 | |||
| 联系我们 | |||
| 供应采购电话 | **** | ||
| 地址 | 山东省龙口南山工业园南山集团总部办公楼 | ||
关注乙方宝服务号，实时查看招标信息>>
相关招标信息推荐
10月辅材采购项目询价公告（变更）
招标变更烟台20251207
自动化摇臂焊接机器人外购件采购询价公告（变更）
招标变更烟台20251207
山东高速集团有限公司烟台分公司2024-2026年日常养护工程一标段项目经理部采购防眩材料
招标公告烟台20251207
山东高速集团有限公司烟台分公司2024-2026年日常养护工程一标段项目经理部采购隔离栅材料
招标公告烟台20251207
中铁十局集团有限公司烟台分公司烟台八角湾国际医院医疗区项目EPC工程门诊楼、医技楼幕墙及相关工程招标公告
招标公告烟台20251207
实训条件改善-智慧体质测试中心更正公告
招标变更烟台20251207